Engelsk beskrivning nedan
Professionell reparation
av sensorglaset på din Leica M9
vid korrosionsskador och repor
Vi byter ut det skadade filtret på sensorn i din Leica-kamera
Process i två steg
-
Skicka in kameran: Du beställer artikeln ”Leica-M9-Inspection” och skickar din Leica M9 till oss. Vi kontrollerar noggrant om det är möjligt att byta ut det defekta filtret. Vi inspekterar alla Leica M9-modeller (Standard, M9M, M9-P, M-E, Titanium).
-
Kontroll och reparation: I cirka 9 av 10 fall är reparation möjlig. Efter bekräftelse köper du artikeln ”Leica-M9-CCD-Repair”. Om reparationen inte är ekonomiskt rimlig returnerar vi kameran oreparerad. Notera: Kostnaden för ”Leica-M9-Inspection” täcker returfrakten i sådana fall.
Insändning av Leica och reparationstid
Skicka din Leica väl emballerad och fullt försäkrad i neutral förpackning. Tillbehör och batteri behövs inte. Ta bort minneskortet innan du skickar kameran.
På grund av höga tekniska krav kan reparationen i undantagsfall ta upp till 4 veckor. Du kan när som helst be om en mer exakt tidsuppskattning.
Vår reparationstjänst inkluderar
- Borttagning av det defekta filtret
- Installation av ett nytt, korrosionsbeständigt specialfilter
- Finjustering av de optiska egenskaperna
- Omfattande slutkontroll av bildkvaliteten
- 24 månaders garanti på filterglaset
Teknisk bakgrund:
Många Leica M9-kameror drabbas av sensorkorrosion. Orsaken är nedbrytning av IR-spärrfiltret.
Vår lösning: utbyte till Schott BG61-glas, som är fullt kompatibelt med det ursprungliga Leica-filtret.
Bilderna visar exempel tagna med skadade Leica-kameror jämfört med bilder tagna efter reparation. Det är verkliga foton från flera reparerade kameror.
Observera:
Hos många Leica M9-kameror som påverkas av den så kallade sensorkorrosionen har vi nyligen upptäckt ytterligare ett problem:
Förutom den successiva nedbrytningen av filterglaset börjar även det keramiska limmet som håller sensorglaset på plats att lösas upp. En oljig, gulaktig vätska som innehåller svavelsyra bildas.
Denna vätska uppstår vid kanten under filterglaset, där det gamla keramiska limmet band ihop glaset och sensorn. Eftersom vätskan är rörlig kan den tränga in under glaset och nå de känsliga mikrolinserna på sensorn, där den kan orsaka fläckar eller permanenta skador. Den kan också förstöra de tunna guldförbindelsekablarna som styr sensorn. Denna syra innebär sensorns slutliga undergång. Fenomenet är relativt nytt och rapporteras nu även av andra verkstäder.
Varför är snabb reparation viktig?
Med tiden fortsätter det gamla limmet att brytas ned, vilket skapar mer syra och ökar risken för permanenta sensorskador. Snabb öppning och rengöring är därför avgörande.
Vad innebär detta för reparationen?
När vi tar bort sensorglaset måste all syra avlägsnas helt och mycket noggrant. Trots största försiktighet finns alltid en risk att en droppe av denna aggressiva vätska når mikrolinserna, eller att anslutningskablarna redan har skadats av syran. I sådana fall blir sensorn oåterkalleligt förstörd.
Viktig tilläggsinformation: vår nya metod
Efter att ha upptäckt dessa nya typer av skador har vi utvecklat en egen metod som gör det möjligt att avlägsna syran helt. Vi kan även delvis reparera skadade anslutningskablar. Vi förbättrar kontinuerligt våra arbetsmetoder och verktyg. Det betyder att framgångsgraden för reparationerna förväntas öka — men en sak är säker: tiden arbetar mot sensorn.
Hur går vi vidare?
• I kostnadsförslaget informerar vi kunden om kameran har klassisk sensorkorrosion eller även syraproblemet.
• Om syraproblemet finns bör reparationen ändå genomföras.
• Priset är detsamma som för ett normalt byte av sensorglas.
• Vi behöver dock en friskrivning för eventuella följdskador, eftersom risken orsakas av den redan existerande syran — inte av vårt arbete.
• Vi informerar också om att en sensor som påverkas av syra med stor sannolikhet kommer att förstöras om man inte gör något — medan ett reparationsförsök ger en realistisk chans att rädda den.
Vertikal justering av mätsökaren
Vid behov kalibrerar vi mätsökaren. Om bilden är vertikalt förskjuten vid fokusering rekommenderar vi en justering.
Kameraläder
Förutom sensorreparation erbjuder vi också byte av lädret på din Leica-kamera. Slitna delar ersätts med material av hög kvalitet (tillägg: 50 €).
🌍 Internationella kunder: Beställningar från hela Europa är möjliga. För länder utanför EU tillkommer en serviceavgift på 100 €.
Erfarenhet & förtroende
Vi har redan reparerat och modifierat över 5 000 kameror och objektiv. Mer än tusen positiva recensioner på eBay skapar förtroende.
Frågor? Ring oss — våra kontaktuppgifter finns i avtrycket.
English Description
Professional Repair
of the Sensor Glass of Your Leica M9
for Corrosion Damage and Scratches
We replace the damaged filter on the sensor of your Leica camera
Process in Two Steps
-
Shipping the camera: You order the item “Leica-M9-Inspection” and send us your Leica M9. We carefully check whether replacing the defective filter is possible. We inspect all Leica M9 models (Standard, M9M, M9-P, M-E, Titanium).
-
Inspection and repair: In about 9 out of 10 cases, the repair is possible. After confirmation, you purchase the item “Leica-M9-CCD-Repair”. If repair is not economically feasible, we return the camera unrepaired. Note: The price for “Leica-M9-Inspection” covers the return shipping costs in this case.
Sending in the Leica and Repair Time
Please send your Leica well packed and fully insured in neutral packaging. Accessories and battery are not required. Please remove the memory card.
Due to high technical requirements, repairs may take up to 4 weeks in exceptional cases. You may request a more precise estimate at any time.
Our Repair Service Includes
- Removal of the defective filter
- Installation of a new corrosion-resistant special filter
- Fine adjustment of optical properties
- Comprehensive final image quality control
- 24 months warranty on the filter glass
Technical Background:
Many Leica M9 cameras suffer from sensor corrosion. The cause is the degradation of the IR-cut filter.
Our solution: replacement with Schott BG61 glass, which is fully compatible with the original Leica filter.
The images show sample photos taken with damaged Leica cameras and next to them photos taken with the repaired sensor. These are real images from several repaired cameras.
Note:
In many Leica M9 cameras affected by the so-called sensor corrosion, we have recently discovered an additional issue:
Along with the progressing degradation of the filter glass over time, the ceramic adhesive connecting the damaged sensor glass to the sensor also begins to break down. An oily, yellowish liquid consisting of sulfuric acid is formed.
This liquid forms at the edge under the filter glass where the former ceramic adhesive bonds the glass to the sensor. Since the liquid is mobile, it can move under the glass and reach the delicate microlenses on the sensor. There it causes stains or permanent damage. It can also destroy the golden bond wires that control the sensor. This acid is the definite death of the sensor. This phenomenon is relatively new and is now being reported by other repair shops as well.
Why is quick repair important?
Over time, the old adhesive continues to break down, creating more and more acid, and increasing the risk of permanent sensor damage. Timely opening and cleaning is therefore crucial.
What does this mean for the repair?
When removing the sensor glass, we must remove the acid completely and very carefully. Although we work with utmost caution, there is always a fundamental risk that a drop of this aggressive liquid reaches the microlenses or that the bond wires have already been damaged by the acid. In such a case, the sensor would be irreparably damaged.
Important addition: our new procedure
After identifying these new damages, we have developed our own method over many months that allows us to remove the acid without residue. In addition, we are also able to repair damaged bond wires to a certain extent. We continuously improve these working methods and the necessary tools. This means: as time goes on, we expect the repair success rate to continue increasing — but one thing is clear: time works against the sensor.
How do we proceed?
• In the cost estimate, we inform the customer whether the camera suffers from classic sensor corrosion or is also affected by the acid problem.
• If the acid problem is present, the repair can and should still be performed.
• The price remains the same as for a standard sensor glass replacement.
• However, we require a waiver for possible consequential damages, since the risk arises from the pre-existing acid — not from our work.
• At the same time, we point out that a sensor affected by the acid problem will very likely be destroyed anyway if nothing is done — while the repair attempt offers a realistic chance of saving it.
Vertical Rangefinder Adjustment
If necessary, we recalibrate the rangefinder. If the images are vertically misaligned during focusing, we recommend an adjustment.
Camera Leatherette
In addition to sensor repair, we offer replacement of the leatherette on your Leica camera. Worn parts are replaced with high-quality material (additional cost: €50).
🌍 International customers: Orders from all over Europe are possible. For non-EU countries, a handling fee of €100 applies.
Experience & Trust
More than 5,000 cameras and lenses have already been repaired and modified by us. Over a thousand positive eBay reviews provide trust.
Questions? Call us — our contact information is in the legal notice.